ASTM B117 Salt Spray Testing: Overview
The ASTM B117 standard specifies a method for evaluating the corrosion resistance of metallic materials by exposing them to a salt spray (fog) environment. This accelerated test is widely used to compare finishes, coatings, and materials under controlled laboratory conditions, providing a relative measure of corrosion performance over a defined period.
Standards and Scope
ASTM B117 covers the apparatus, parameters, and procedures required to expose specimens to a saline mist or fog. The test is applicable to a broad range of metals and coatings, including electroplated, painted, and galvanized products. It is commonly employed in quality assurance, research, and product development to assess protective efficacy and to screen potential materials for corrosive environments.
Test Setup and Procedure
Sample Preparation
Specimens should be prepared according to the coating or material manufacturer’s recommendations and the project specifications. Surface cleaning, masking of areas not intended for exposure, and consistent dimensions help ensure reproducible results.
Test Chamber and Salt Solution
A continuous or cyclic fog is generated inside a controlled chamber. The salt solution is typically a sodium chloride solution with commonly used concentrations ranging around 5% by weight, prepared with deionized water. Temperature control, airflow, and humidity are monitored to maintain consistent test conditions throughout the exposure.
Exposure Time and Cycle
Exposure durations are selected to meet the test objectives and may range from several hours to thousands of hours. The standard permits variations in cycle length and replication, provided the resulting test conditions are well documented and justified.
Evaluation and Post-Test Examination
After the exposure period, specimens are removed and inspected for corrosion effects. Criteria for evaluation include visible corrosion, staining, pitting, blistering, or other degradation modes. Measurements may involve mass loss, coating integrity, or surface roughness, depending on the test objective.
Advantages and Limitations
Advantages of ASTM B117 include its relative simplicity, speed, and broad applicability for screening corrosion resistance. Limitations encompass the artificial nature of the salt spray environment, potential overestimation or underestimation of service-life performance, and the need for careful interpretation when comparing different coating systems or substrate materials.
Applications and Interpretation
The test is commonly used for:
- Assessing coating adhesion and coverage under corrosive exposure
- Comparing alternative finishes and surface treatments
- Supporting material selection during design and procurement
- Verifying production consistency across batches
Interpretation should consider the specific service environment, the geometry of the test specimens, and the correlation between salt spray results and real-world performance. Supplementary tests or accelerated corrosion methods may be employed to provide a more comprehensive assessment.
